Do your scissors need a tune-up? Are they feeling a bit sluggish? Not cutting as smoothly as they used to? This comprehensive guide will show you how to sharpen and fix scissors. We’ll cover everything from the basics of sharpening to more advanced techniques for fixing damaged blades. So whether your scissors are just a little dull or are completely broken, we have you covered!
Why Scissors Get Dull and How to Fix it
The main reason is simply wearing and tear. Every time you use your scissors, the blades rub against each other and slowly wear down. This is especially true if you use them for tough materials like cardboard or construction paper. Over time, this wear and tear will take its toll, and your scissors will start to feel dull.
Fortunately, you can do a few things to fix this problem.
Here are a few things you will need to sharpen your scissors:
- a sharpening stone
- a honing oil
- a pair of pliers
- a cloth or paper towel
If the scissors are blunt
If the scissors are blunt, you can sharpen them using a sharpening stone:
- Find a flat surface to place the scissors on.
- Place the sharpening stone on top of the scissors, so the blade touches the stone.
- Use a back and forth motion to sharpen the blade.
If the scissors are jammed
If the scissors are jammed, use a pair of pliers to try and free them up. First, grip the handles of the scissors with the pliers. Then, twist the pliers back and forth until the blade is released from whatever it is jammed into.
If the scissors are dull
If the scissors are dull and not cutting as well as they used to, you can try honing them:
- Find a honing rod or steel.
- Hold the honing rod at a 20-degree angle to the blade.
- Run the blade along the honing rod from the base of the blade to the tip.
If the scissors are rusty
If the scissors are rusty, you will need to clean and lubricate them before they will work properly again:
- Use a rust-removal product to remove the rust from the scissors.
- Lubricate the scissors with light oil or WD-40.
- Test the scissors to make sure they are working correctly.
If the scissors are bent
If the scissors are bent, you must use a hammer to straighten them out:
- Place the scissors on a hard surface.
- Use a hammer to gently tap the bent part of the scissors back into shape.
- Test the scissors to make sure they are cutting properly.
If the screws are loose
If the screws are loose, tighten them with a screwdriver:
- Find the loose screws.
- Use a screwdriver to tighten the screws.
- Test the scissors to make sure they are cutting properly.
If the handles are loose
If the handles are loose, you will need to glue them back on:
- Find a strong glue that will hold the handles in place.
- Apply the glue to the handles.
- Attach the handles to the scissors.
- Let the glue dry before using the scissors.
If the blades don’t close properly
If the blades don’t close properly, you may need to adjust the screws on the hinge:
- Find the screws that control the tension on the hinge.
- Use a screwdriver to loosen or tighten the screws.
- Test the scissors to see if they are cutting properly.
If one of the blades is broken
If one of the blades is broken, you will need to replace it:
- Find a new blade that is the same size and shape as the broken blade.
- Remove the broken sword from the scissors.
- Attach the new blade to the scissors.
- Test the scissors to make sure they are cutting properly.
If you have any other problems with your scissors
If you have any other problems with your scissors that you can’t fix, it’s time to take them to a professional. A professional can fix any problems and get your scissors working again.
Precautions you Should Take when Using Scissors.
Now that you know how to sharpen and fix scissors, you should keep a few things in mind when using them.
- First, always use the proper cutting technique.
- Second, never force the scissors through anything they’re not meant to cut.
- Third, always keep the blades clean and lubricated.
- Finally, make sure to store the scissors properly when not in use.
By following these simple tips, you can extend the life of your scissors and keep them working like new.
Conclusion
That’s it! Now you know how to sharpen and fix scissors. With this knowledge, you can keep your scissors working like new for years to come. Thanks for reading! We hope this guide was helpful. If you have any questions or comments, please feel free to leave them below.
FAQ about How to Sharpen and Fix Scissors
How do you fix scissors that don’t cut?
- If the scissors are dull, you can try honing them.
- If the scissors are rusty, you will need to clean and lubricate them before they will work properly again.
- If the screws are loose, tighten them with a screwdriver.
- If the handles are loose, glue them back on.
- If one of the blades is broken, replace it.
- If you have any other problems with your scissors, take them to a professional.
How do you realign scissors?
To realign the scissors, you will need to adjust the screws on the hinge:
- Find the screws that control the tension on the hinge.
- Use a screwdriver to loosen or tighten the screws.
- Test the scissors to see if they are cutting properly.
Can scissors be fixed?
Yes, scissors can be fixed. If you have any other problems with your scissors, take them to a professional, and they will be able to help you fix them.
How do you fix hard-to-open scissors?
There are a few things you can do to fix hard-to-open scissors:
- Apply pressure to the handles with your fingers.
- Try squeezing the handles together with pliers.
- If the screw is loose, tighten it with a screwdriver.
- If the blades don’t close properly, adjust the screws on the hinge.